플랜지 DIN 2502 PN16 Plate Flange, SOP Flange | KS플랜지, JIS플랜지, KS B1503, JIS B2220, FF, RF, HUB, BLIND

din slip on flange, din plate flange, din 2573, din 2576, din2501, din2502, din2503, din2543, flange

LINKIN FLANGES

1. Standard: DIN 2502, Glatte Flansche
2. Type: Plate Flange, Slip on Flange (Flat Face without Neck)
3. Pressure: PN16
4. Size: DN15 - DN500, larger Sizes available on request
5. Raw Material: C22.8, RSt37.2, S235JRG2, C21, A105
6. Process: Forged or Stamped
7. Basic requirements for Material and Flange

Germany standard flange DIN 2502 for soldering or welding Nominal Pressure 16
Flansche, glatt zum löten oder schweißen DIN 2502 Nenndruck 16
Brides plates a souder DIN 2502 pression nominale 16
DN	Pipe	d1	K	D	b	d2	Thread	Holes	Weight
									Kg
10	17.2	17.7	90	60	14	14	M12	4	0.216
15	21.3	22.0	65	95	14	14	M12	4	0.669
20	26.9	27.6	75	105	16	14	M12	4	0.935
25	33.7	34.4	85	115	16	14	M12	4	1.110
32	42.4	43.1	100	140	16	18	M16	4	1.622
40	48.3	49.0	110	150	16	18	M16	4	1.854
50	60.3	61.1	125	165	18	18	M16	4	2.462
65	76.1	77.1	145	185	18	18	M16	4	2.993
80	88.9	90.3	160	200	20	18	M16	8	3.605
100	114.3	115.9	180	220	20	18	M16	8	3.990
125	139.7	141.6	210	250	22	18	M16	8	5.403
150	168.3	170.5	240	285	22	22	M20	8	6.546
175	193.7	196.1	315	270	24	22	M20	8	4.522
200	219.1	221.8	295	340	24	22	M20	12	8.962
250	273	276.2	355	405	26	26	M24	12	12.758
300	323.9	327.6	410	460	28	26	M24	12	16.593
350	355.6	359.7	470	520	30	26	M24	16	24.070
400	406.4	411.0	525	580	32	30	M27	16	30.186
450	457	462.3	585	640	38	30	M27	20	41.653
500	508	513.6	650	715	38	33	M30	20	52.842

NOTE:
1. Facing according to DIN 2526
Flat face:
Form A, Face without any requirements
Form B, Face Rz=160, machined (not smoother than 40µm)
Raised Face:
Form C, Face Rz=160, machined (not smoother than 40µm)
Form D, Face Rz=40, machined
Form E, Face Rz=16, machined
2. Tongue and groove according to DIN 2512
Form F, Tongue
Form N, Groove
3. Male and Female according to DIN 2513, DIN 2514
Form V13, V14, Male
Form R13, R16, Female
4. Chemfering for diaphragm-weld packings, PN64-PN400, according to DIN 2695
5. Facing for lens-shaped joints, PN64-PN400, according to DIN 2696

	DIN 2573
	DIN 2576
	DIN 2501
	DIN 2502
	DIN 2503
	DIN 2543


	Contact: Austin Call: + 86 -531 - 83297728 - 8001 Email: sale@ksflange.com Skype: Click to call QQ: 1606229856 http://www.ksflange.com